How To/DIY: How I made this Bibliophile canvas wall art

bibliophile canvas

So, today’s post is a little bit different. A couple of weeks ago, I made a bibliophile canvas for my wall, and decided to make a step by step post showing how I made it, incase any of you were intrigued or wanted to try it too.

Along with the step by step, I’ll write down any ways you can get a similar look easier, in case you don’t want to do as much painting, or give other options for materials you could use. Basically – I’ll try and make this as easy as possible to make.

I don’t know whether you guys will like this post or not. I can only hope you do.

So, here’s how I made my bibliophile canvas!

end

You will need:

– A small canvas (or paper, if you prefer)

– A sharpened pencil & black ink pen

– An eraser

– A ruler

– Acrylic paint

– Paintbrushes

– Water


1

before lines

Plan the design for the canvas. As you can see from the photo above, I planned for mine to have two lines of writing, with a row of books beneath. So with this design idea in mind, draw two lines – making sure the top line leaves a larger space than the bottom, since the word “bibliophile” will be bigger than the description below.

2

font draw writing

Using the lines as a guide, draw your text onto the canvas. I used a photo reference by going onto the same site I create my blog graphics, and made the design I wanted to draw. With this on my laptop screen, it was easy for me to copy the fonts. If you’re not confident with drawing the fonts yourself, you could always print your design fonts out and stick them onto the canvas later.

3

erase line

Once you’re happy with the text you’ve drawn, erase as much of the guidelines as you can. You don’t have to get rid of them completely, since the acrylic paint will probably cover most of it. This is just a precaution, in case the lines are too dark to cover.

4

canvas design

Step four is simply to draw the books on. Again, I had a photo reference (this time from Pinterest), but I basically just drew book spines and page edges, all of different sizes, with some on an angle like they’re propped up.

5

supplies paint and brushes

Once your design is all done and dusted, gather your paint together.Acrylic paint is usually best for canvases, and you can use whichever paintbrush you’re most comfortable with. Make sure you have water nearby to clean your brushes in!

6

mix paint

Decide on your colour scheme. I went for a pink theme, with my background a pale pink and the book spines a darker shade. But you can go for shades of pink, blue, purple, green, orange or even – dare I say it – shades of grey (that book has ruined colours for me). Or even mix the colours, if you like. Whatever colour scheme you decide to go with, this step is basically…mix the paint! Also TEST THE COLOUR on paper first. You need to make sure it’s the right colour when spread.

7

dodge writing

Start painting your background! If you can, avoid painting over the lettering, because you need a guide to follow when you paint that in, but it doesn’t matter if you paint over it slightly.

If you skipped over the step of drawing the text yourself, or don’t want to paint around it, like I said before you can print the text out and stick it onto the canvas later.

8

background done edges

As you can see from the photo on the left, it really doesn’t matter if you go over the writing a bit. I mean, you can barely see the part that says “huge lover of books”, but there was just enough for me to have a guide to follow. But once you’ve painted the entire background, make sure you paint the edges too!

9

paint

Paint your details! I painted the book spines first, then went onto the lettering. For the lettering I’d advise using a really small paintbrush, because it can take quite a lot of concentration. But don’t worry if you don’t get it perfect – that’s what the black ink pen is for. 

If you printed and cut out the writing instead, this is the stage where you’d stick it onto the canvas.

10

pen test

Speaking of the black ink pen – first of all test it out on the back of the canvas first. Sometimes certain inks can bleed on a canvas, so it’s always best to test it first. After a few minutes, if the ink hasn’t bled and gone all fuzzy, it’s good to use. So, use the pen to add the finishing touches. Clean up the edges of your lettering if it’s not as neat as you want it to be. Add the small details on the book spines or draw in the page edges.

done

end close end


I hope you guys enjoyed this post!

It’s very different type, but I figured there’d not been any of my “bookish creativeness” in a while, so it was about time some was brought in.

Let me know what you think!

Do you like the canvas?

Would you think of making your own?

Also – would you like to see more bookish DIY? Maybe DIY bookmarks (especially corner bookmarks)? I’m open to suggestions too! I love doing DIY type things.

Let me know in the comments!

Until next time…

sign new

Come and visit me!

instagram pi  twitter pi  goodreads pi

Snapchat Username: “frolic_fiction”

Advertisements

46 thoughts on “How To/DIY: How I made this Bibliophile canvas wall art

  1. Oh, gosh, that’s so pretty. You must have the patience of a saint! Well, you obviously have talent. If I tried to do this, it would look so crazy! I liked that you showed how you made it. Thanks for sharing with us! 👏👏

    Liked by 1 person

    1. Thank you so much Rebekah! Glad you enjoyed seeing this! And I’m so glad the font worked out ahaha 😆 I plan to do more creative DIY posts so let’s just hope I have more ideas in the future! 😀

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s